Production
Phosphorus reduction
The highly efficient and innovative REPHOS-COMORES technology treates the effluent and reduces the phosphorus concentration through tertiary coagulation with microscreen filtration.
This technology stably reduces the phosphorus concentration down to 0.1 mg/l and effectively minimizing the potential for algae and cyanobacteria growth.
Microfiltration and filtration
Microscreen filters are the ideal solution for filtering the raw water from wastewater treatment plants and industries, e.g., paper mills and textile industry, power and heating plants, dairy, slaughterhouses, fish farms, ZOOs, but also intake raw water for potable water treatment and many other operations
Filter cloth is available with mesh opening sizes ranging from 20 µm on the Drum filters till 5 µm for Disc filters (enhanced Intensified version of Disc filter and Pile cloth ORSO are available as well).
“CLI-CLO” and “Segments” are based on patented systems that saves maintenance time and costs.
Find out below how we can support your needs with our innovative technology.
Flotation
Physical flotation is a process enabling the removal of a larger quantity of undissolved matter and fats from wastewater. Flotation is applied where any other method of filtration and sedimentation cannot be used. Thickening of excessive sludge in municipal wastewater treatment plants, purification of industrial wastewater, etc. represent typical examples of this.
Fine pre-treatment
The screens to be installed at the inlet of the wastewater plant are expected to perform the function such as to separate all solid particles of at least one dimension smaller than the width of screen bar spacing and to ensure the reliability of this function.
For process reasons a small spacing between the bars is required (6 or 3 mm) and in practice two systems are used: with direct flow of wastewater from the sewer pipe to the grid and / or with a pumping pit, obviously it depends on the conditions of the customer and the shared solution.
Coarse pre-treatment
The belt screens are intended for coarse pre-treatment of wastewater and transport of screenings. The main advantage of this system is high pre-treatment efficiency; transport of screenings from greater depths is possible; removal of objects of greater dimensions; greater construction tolerances are possible; lamellas are high-resistant to damage; very low operational costs.
Integrated pre-treatment
Our last version of compact Multifunctional devices serves as a mechanical stage of combined pre-treatment for small and large applications: separation of screenings, sand and heavy particles from the inflowing water and their further transport to containers. Can optionally be equipped with fat, oil and grease extraction.
Sand separation and washing
Sand separator is intended for separation of sand from waste water; suitable for municipal waste water treatment plants but also in industrial operations this system has some advantages such as the possibility to remove sand grains of 0.2 mm in size or bigger - its hydraulically balanced structure eliminates occurrence of short-circuit currents - integrated sand washing available.
Need more information? Contact our team.